Thursday, April 29, 2010

Two shots, same setup, different premises

I've been quite prolific over the past few weeks. Last weekend was a bit of a two-faced affair, with a gorgeous Saturday (which made me go out and waste a roll of Delta 400 - results slightly meh), followed by a Sunday with incessant rain. This gave me the opportunity to finally build my little macro studio which mostly consists of a box of cardboard with the two sides cut out and the gaping holes covered with tracing paper as a diffuser. Softly bent white poster board serves as the seamless backdrop. These things have been done and written about to death so there is no point in further going into great details here. Find DIY instructions on the internet, for example here.

Now, while a setup like this gives you pretty well controlled and soft lighting, it's still not quite as straight-forward in practice as the idea is to eliminate all shadows and get an almost pure white as the backdrop for the object. This shows what I mean:

This I shot digitally and while this gives you an infinite amount of retries, even then you will have to battle with slight unevenness in the lighting, Look at the upper-left corner. This is not lens-vignetting but rather a slight darkening caused by lack of light. So the diffusion is not perfect. Also, take note that this is not what it looks like straight out of the camera. It requires post-processing to make the whites as white as it is and, in particular, to fix the white-balance which always has the tendency to be off. Both the camera and Photoshop will distrust all the white in the frame, resulting in an amber tone.

Using film for shots like this requires a different strategy: First off, you don't get to re-shoot until it's right and you wont get any kind of feedback until the film emerges from the development tank. On the plus-side, it's easier to obtain pure white as bumping the development time will leave the shadows largely intact but bump the highlights. Finally, film (especially B&W) is much more robust as far as white-balance is concerned.

And now behold the following two shots: Identical setup (well, close to; ignore the slightly different angle and relative size of the object), the same lens (Tamron 90mm f/2.8) but different cameras (Pentax K10D versus Pentax K2) but most importantly, one shot digitally and the other shot on film:

The digital one offers color which is nice as it literally makes the coating of the lens visible. The depth-of-field is too low. I was impatient and wanted to try out the just completed macro studio right away, hence I shot hand-held. At ISO 400, I needed f/4.5 to obtain a barely hand-holdable shutter speed of 1/60. The white-balance is slightly too warm, too.

For the second shot, the camera rested firmly on a tripod and this time I used a much smaller aperture (either f/11 or f/16) at a shutter speed of one or two seconds. The film is Efke 25KB. Film of such slow speed is really an anachronism but it's paying huge dividends here. This is almost medium-format territory as far as sharpness and details are concerned. Noise is low but this being B&W film, it is of course still discernible. Find larger-sized versions of this shot here.

What is most striking however is the appearance of a much sharper contrast even though a histogram would disagree and indicate that the above digital shot has in fact darker shadows and brighter highlights.

For those keeping book, I developed the roll of film in Ilford Ilfosol-3 (diluted 1+19) for 7 minutes at 20/68 degrees. Ilfosol is said to be a good developer for slow film and I would agree. The little bit of additional grain it induces is a low price to pay for the higher accutance and local contrast it delivers.

Thursday, April 8, 2010

The resurrection of the Sears 135mm f/2.8

Sort of. As I had mentioned earlier, I had arranged for a replacement for my Sears 135mm f/2.8 lens which arrived today by mail. To my dismay, this new specimen is a distinctly different model: For one, it's considerably bulkier and it comes with a 55mm thread instead of the 52mm of my old one. This is a bit of a shame since at this point I don't actually have any 55mm filters. Also, it's lacking the super-multi-coated  designation on the lens front so this one might only be single coated.

I suspect it is the previous model of the same lens so at least optically it might be identical. Here she is on my K2 which still has that yet-unfinished roll of film from last weekend in it:


I cheated a little and made the new Sears look bigger by using a wide-angle close-focus lens.

Incidentally, I used another Sears lens for this photo, a 28mm f/2.8 which I got in an M42 mount that I swapped out against a K-mount of another broken 28mm lens. It no longer focuses to infinity but does sport an A setting so even my K10D  can control the aperture. :-) And it still does close-focus, naturally.

Sunday, April 4, 2010

A day out with a Yashica rangefinder

This Good Friday I did three things (all at the same time) that I normally never do:
  1. I shot with a rangefinder camera, the Yashica Electro 35 GSN.
  2. I shot color film, Kodak Ekta 100.
  3. I went to Central Park at a time where tourists would be flooding the place.
The Yashica I acquired a week before, off eBay of course. I felt I needed to add a new type of camera to my collection that up to this point only consisted of 35mm film SLRs (all Pentax except for a Nikkormat FT) and a Pentax 6x7 medium format rig. I was on paper quite familiar with rangefinders but in practice, things are always a little more finicky. It took me a while to figure out how to focus. The Yashica has a little yellow area in the middle of the viewfinder and this is where the focusing mechanism shifts the ghost-image in place. It's quite subtle and easy to overlook.

As with most rangefinders, the shutter action is very quiet and inaudible in the streets of New York. Theoretically, this would make it a perfect street camera but I believe in reality it is a little too bulky for this. It's a slightly bigger than both my Pentax K2 as well as the rather substantial Nikkormat. 

Other than that, the camera is parallax-corrected. I found this to be only partially true though. While the frame markers shift up and down depending on the focus distance, they do not shift horizontally. The viewfinder is positioned on top and left of the lens and indeed, some of my photos showed odd framing. Things that I expected to be in the photo were clipped off on the left of the frame and instead I had some extraneous stuff on the right. So this is something the photographer will have to compensate for.

Focusing seems more difficult than with any of my single-lens reflexes. I didn't find any really sharp images when I got my first roll back. Meanwhile, the camera has a non-interchangeable 47mm f/1.7 lens attached to it. It earns points for being fast but due to my lack of focusing skills, I will probably stick with smaller apertures.

The Yashica's only metering mode is aperture-preferred, so you dial in the aperture and the camera steplessly selects what it considers an appropriate shutter-speed (its meter sits atop the lens so it has no TTL metering). It wont however tell you what it has chosen - all you get is a warning for slow speeds and overexposure.

Anyway, to cut long things short, the Yashica is a curious camera with a very pretty body that handles well and offers too little to distract you from taking photos. And here are two that I found tolerable enough to escape the bin:

 In full size (find it here), you will see that the stem of the tree on the right is sharpest. This is strange as I recall I had the lens focused to infinity.

This might be more in the domain of the Yashica. There's even less in focus than in the previous photo, but at least it features some people doing interesting things. 

So by and large, I enjoyed handling this Yashica. I doubt I will abandon my SLRs for it anytime soon, but I can see occasions where it could be more useful. What I need to do is find an application for the rather idiosyncratic focal length of 47mm. On my morning out in Central Park, I found it either too wide or not wide enough, but never quite right. Oddly enough, I often have a 50mm lens on my SLRs and find that focal length perfectly natural. I blame the viewfinder which forces me to place things within the marked area and thus makes you believe you have a wider lens on it.

R.I.P.

So I was meandering through Astoria Park this morning, armed with my Pentax K2 on which my beloved Sears 135mm f/2.8 was sitting. I had some problems with the depth-of-field preview - I had to push the button on the camera body several times before the viewfinder would finally dim down. It didn't take long that not even the most obstinate and furious button mashing would have any effect. I took off the lens and fiddled with the stop-down lever only to realize that the lens would no longer stop down. Sticky aperture blades, certainly.

What sounds harmless and petty is sadly the death of this wonderful lens. It's a curious dilemma: It can probably be repaired, although finding someone who can fix a 20 year old lens might not be easy. And while I am in love with this lens more than with any other of my lenses, it also happens to be one of my cheapest. You can get decent specimens for around $20. So instead I decided to quickly take it apart to see if there's anything I can do. But as always, the aperture blades are hidden underneath the rear element of the lens which is glued to the outer shell. No go, therefore.

So I didn't hesitate and arranged instantly for a replacement. There's a decent number of those available on eBay at any given time, fortunately. Mine will be shipped from California so I have to wait a few days. I just hope it will perform equally well - one never knows with these off-brand lenses which are often rebadged.

As a final tribute to this great little performer, here's a few photos I've taken with it:

It's an almost ideal portrait lens. The focal lens is just about perfect and f/2.8 is plenty for blurring out any distracting elements in the background. The above was shot with the Pentax ME Super on Ilford HP5+ pulled one stop (Ilfotec DD-X 1+4 for 8 minutes at 20/68 degrees)

And it's sharp. In the above, I used around 28mm of extension tubes to focus that closely (mine is the non-macro version of this lens). Shot on Ilford Delta 100 and developed in Ilfotec DD-X, 1+4 for 12 minutes at 20/68 degrees.

This Sears often gets an honorable mentioning when 135mm lenses in the Pentax K-mount are discussed but more often than not, it gets good marks for its low price but is forced to stand behind the smc PENTAX 1:2.5 135mm or its slower and cheaper sister, the smc PENTAX-M 1:3.5 135mm.

I will miss her. That is, until the replacement has arrived!